Top Filter
Minimum spectral band resolution
reaches 10nm The transmission rate reaches 99% and the cutoff rate reaches OD6
SCMOS Camera
Active refrigeration SCMOS fluorescence camera Low signal-to-noise ratio, high resolution
Original Light Source Lighting Design
Specific spectral band LED light
source excitation Prevent cross-color efficiently
Original Preview Shooting Technique
20nm positioning accuracy Support 80x magnification
Flexible Configuration
Automated identification of scan areas Shorten scanning time
Professional Services
Removable color filter Easy to maintain
| IMAGING & CAPACITY | ||||
| Name | KF-FL-005 | KF-FL-020 | KF-FL-120 | KF-FL-400 |
| Brightfield | ||||
| Magnification | 20x & 40x | |||
| Optical Magnification | 20x objective 200, 40x objective 400 | |||
| Speed | 15 sec/slide | |||
| Throughput |
72 slides / hour at 20x 60 slides / hour at 40x (use 20x objective) 48 slides/ hour at 40x (use 40x objective) |
|||
| Resolution | 0.25 um/pixel at 20x, 0.125 um / pixel at 40x | |||
| Scan Method | Line Scanning | |||
| Output Format | .KFB, .SVS, .DCM, .TIFF | |||
| Fluorescence | ||||
| Speed | ≤6 min / slide, 10mm * 10mm, 3 filters ≤12 min / slide, 10mm * 10mm, 6 filters |
|||
| Optical Magnification | 20x objective 400, 40x objective 800 | |||
| Resolution | 0.25 um/pixel at 20x 0.125 um/pixel at 40x |
|||
| Scan Method | Area Scanning | |||
| Camera Sensor Type | sCMOS | |||
| Light Source Model | Lumencor Sola Light Engines | |||
| Light Source Dimensions | W * L * H: 125mm * 263mm * 163mm | |||
| Light Source Power Requiements | 120 W, 24 VDC, 5 A. Power supply and cord included with all orders | |||
| Light Source Weight | 3.6 kg | |||
| Fluorescence Channel Options | 3,4,6,8,10 | 3,4,6,8,10 | 3,4,6,8,10 | 3,4,6,8,10 |
| Output Format | .KFBF, .QPTIFF | |||
| Typical Filter Parameters | Channel Name | EX(nm) | BS(nm) | EM(nm) |
| KF-DAPI | 350/50 | 400 | 460/50 | |
| KF-GREEN | 495/25 | 515 | 537/29 | |
| KF-ORANGE | 546/10 | 556 | 572/23 | |
| KF-RED | 580/25 | 600 | 625/30 | |
| KF-CY5 | 630/20 | 647 | 667/30 | |
| KF-CY7 | 710/75 | 760 | 810/90 | |
| Common Parameters | ||||
| Scanning Region | 25mm * 50mm 50mm * 50mm 100mm * 50mm |
25mm * 50mm 50mm * 50mm |
25mm * 50mm | 25mm * 50mm |
| Field of View (FOV) | 1mm | |||
| Z-Stack Scanning | ≤10 layers | |||
| Multi Layer Image Fusion | Support | |||
| Objective Lens | Evident X-Line UPLXAPO 20X, UPLXAPO 40X | |||
| Slide Capacity | 5 | 20 | 120 | 400 |
| Slide Holder Type | Tray | Tray | Rack | Rack |
| Slide Holder Capacity | 5 | 2 | 40 | 40 |
| Slide Holder Number | 1 | 10 | 3 | 40 |
| Label Identification | Support | |||
| DIMENSIONS & WEIGHT & POWER | ||||
| Scanner Dimensions (W x L x H) |
470mm x 510mm x 570mm | 490mm x 545mm x 565mm | 585mm x 515mm x 675mm | 525mm x 650mm x 655mm |
| Scanner Weight | 53kg | 55kg | 71kg | 79kg |
| Air Freight Crate Dimensions (W x L x H) |
700mm x 730mm x 920mm | 700mm x 730mm x 920mm | 830mm x 880mm x 920mm | 830mm x 880mm x 920mm |
| Air Freight Crate Weight(Including Scanner) | 81kg | 83kg | 106kg | 114kg |
| Ocean Freight Wooden Crate Dimensions (W x L x H) |
/ | / | / | / |
| Ocean Freight Wooden Crate Weight(Including Scanner) | / | / | / | / |
| Power Supply Voltage Range | 100–240V AC, 50/60Hz | |||
| Power Socket Type | Type A、Type C、 Type D、Type E/F、Type G、Type I、Type J、Type L、Type M | |||
| Rated Power | 150VA | 200VA | 200VA | 200VA |
| Maximum Power Consumption | / | / | / | / |
| IT & COMPUTER | ||||
| PC Model | Dell T3680 Workstation | |||
| PC Parameter | CPU: I7-14700
Memory: 32G*2 DDR5,4800MT/s HardDisk: 2T SSD M.2 |
|||
| GPU Card | Nvidia 4070S | |||
| Monitor | DELL 30 Inch | |||
| Network Adopter | 1Gb RJ45 * 1 | |||
| Operation System | Windows 10 Professional 64bit | |||
| Slides | ||||
| General | The tissue/smear must be mounted with a coverslip, glass or tape. | |||
| Standard | 1-inch x 3-inch (2.54 cm x 7.62 cm) slides. Compatiable with ISO 8037/1. | |||
| Thickness | 0.9 mm ~ 1.1 mm, excluding coverslip | |||
| Special Requirement | The coverslip and attached label must remain fully within the microscope slide perimeter, secured with complete adhesive contact. All surfaces shall lie flat without edge separation. The slide exterior must maintain dryness with no fluid leakage from the specimen zone. | |||
| Maximum Tissue/Smear Thickness | Optimized for tissue thickness of 3-5 μm (including mounting media) | |||
| Coverslips Accepted | The coverslip/label assembly (0.17 mm nominal thickness, standard borosilicate glass or cellulose tri-acetate film) must maintain full edge registration with the microscope slide substrate through continuous adhesive bonding. All interfacial surfaces shall exhibit co-planar adhesion integrity with zero delamination, while the external slide surfaces remain contamination-free from residual fluids or specimen migration. | |||
| Label Area (W x L) | 25 mm x 25 mm | |||
| Label Special Requirement | Adhesive labels must maintain non-protrusive margins within slide boundaries and demonstrate full-surface lamination to the coverslip interface plane (upper slide surface). Prohibited from substrate attachment on the specimen observation surface (lower slide plane), all labeling components shall exhibit edge-to-edge planar adhesion without delamination defects. | |||
| Barcodes Supported | 1D and 2D Barcode, QRCode, DataMatrix Code | |||
